|
MOTORIZATION PRICES Any of our shades can be motorized. To calculate total cost, add the motor choices below to the price of your shade. INFRARED BATTERY MOTOR
Basic Infrared Motor: $160.00, plus cost of shade.
Reloadable Battery Wand: $48.00 12V Battery Wand: $72.00 12V Dual Battery Wand: $144.00 12 Volt DC Plug-in Transformer for each Motor: $106.00 Optional: 10" Extension Infrared Eye Receiver: $24.00 RADIO CONTROLLED BATTERY POWERED MOTOR Basic Radio Control Motor: $288.00, plus cost of shade. You must choose one of the following Power Options and one of the Remote Options. POWER OPTIONS Reloadable Battery Wand: $48.00 12V Battery Wand: $72.00 12V Dual Battery Wand: $144.00
12 Volt DC Plug-in Transformer for each Motor: $106.00
Replaces the battery wand and eliminates the battery power. The battery motor plugs into a transformer which plugs into an outlet. Extension wires might be required. Timer: $320.00 Shade operates by timer and remote 12 Volt DC Plug-in Transformer for up to 6 Motors: $288.00 Replaces battery wands and eliminates battery. Up to six motors can plug into a transformer which plugs into an outlet. Extension wires might be required. Timer with Sun Sensor: $480.00 Shades operate by sun sensor, timer and remote. Program the functions and the shades will operate from built in memory. Deduct the cost of the battery wand if you are using the transformer. Extension Wire 10": $10.00 Extension Wire 48": $14.00 Extension Wire 96": $22.00 Automatic Control Options RADIO REMOTE OPTIONS Hand Held Remotes 1 Channel Radio Remote: $112.00 4 + 1 Channel Radio Remote: $144.00 Wall Mounted Radio Remotes 1 Channel (RTW) Switch: $296.00 4+1 Channel (RTW) Switch: $320.00
SOMFY SMART (Plug In) RADIO CONTROLLED MOTOR MOTIONCO HARDWIRED RADIO CONTROLLED MOTOR Includes heavy duty mounting brackets.
REMOTE C0NTROL PRICING
SOMFY 110 VOLT HARDWIRED MOTORS
*Momentary = The switch must be depressed until the shade reaches the desired point. One or two shades can be operated from a single switch. With the use of relays, one switch can operated 3-100 shades. Please contact us to design a multiple shade system or to add on extra features. Local wiring codes generally require an electrical contractor to open walls for installation. OPTIONAL JOINER
Money Saving Idea: With the addition of a joiner, motorized shades can be connected as long as they are less than 2" apart. One motor can drive two or more shades depending upon the size and weight. This concept works best when the shades are in exact alignment.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||