BRACKETS FOR CLUTCH AND BATTERY OPERATED SHADES
360
Use with R-8 Clutch or 12V motor
Shades up to 78" wide (depending on height and fabric type)
Spear for clutch or motor is 3/8"
Inside mount 1/2"
Height (face mount or ceiling mount space needed) 1 1/2"
Clutch diameter 1 3/4"
Roller diameters: 1",1 1/4", or 1 1/2"
Bracket protrudes from surface 1 1/2"
Inside mount Total depth needed at least 2 3/8"
361
Fascia brackets, 3"
Use with R8
Shades up to 78" wide (depending on height and fabric type)
Spear for clutch 3/8" wide, 1" from bottom of bracket
Don't use with 12V as it interferes with bottom of bracket
Inside mount total depth needed at least 3"; have to drill holes in
brackets
380 (extension bracket)
Use with R8 Clutch or 12V motor
Shades up to 78" wide (depending on height and fabric type)
Roller diameters: 1",1 1/4", or 1 1/2"
Spear for clutch or motor is 3/8"
Inside mount 1/2"
Height (face mounting or ceiling mount space needed) 1 1/2"
Clutch diameter 1 3/4"
Bracket protrudes from surface 1 7/8"
Inside mount total depth needed at least 2 7/8"
560
Use with R16 Clutch
Shades 78"-110" wide (depending on height and fabric type)
Roller diameters: 1 1/2", 2"
Spear for clutch is 5/8"
Inside Mount 1/2"
Height (face mounting or ceiling mount space needed) 2 1/2"
Clutch diameter 2 1/2"
Bracket protrudes from surface 1 5/8"
Inside mount depth needed 2 7/8"
561
Fascia Brackets, 3"
Use with R16 or 12V motors; if with 12V motors must have spear trimmed to 3/8"
Shades 78" to 110" wide and no more than 120" tall (depending on height and fabric type;)
Roller diameters: 1 1/2" or 2"
Can be used with Somfy or MC 400 series motors
Spear for clutch is 5/8", 1 1/2" from bottom of bracket
Inside mount total depth needed at least 3"; have to drill holes in brackets
580 (can be extension bracket for R16)
Use with R24 or R16
Shades over 110" wide (depending on height and fabric type)
Roller Diameters: 1 1/2", 2", or 2 3/8"
Spear for clutch is 5/8"
Inside mount 1/2"
Height (face mounting or ceiling mount space needed) 2 1/2"
Clutch diameter 2 1/2" (R16) or 3 1/2" (R24)
Bracket protrudes from surface 2 1/8"
Inside mount total depth needed for R16 at least 3 3/8"; for R24 3 7/8"
581
Fascia Brackets, 4"
Use with R16, R24 clutches, Somfy 110V HW or plug in motors, MC 500 series motors
Shades over 110" wide, or narrower shades over 120" tall (depending on height and fabric type)
If used with motors, factory has to re-fit with the crown and pressure pin
parts
Spear for clutch 5/8" wide, 2" from bottom of bracket
Inside mount total depth needed at least 4"; have to drill holes in brackets
