Clear Vinyl Shade with Cream 4" Housing, Side Rails, Clutch and Chain.
4"Cream Housing
Rollease Exterior Clutch
Insulate your outdoor living space with custom manufactured Affordable Clear Vinyl Shades chain operated shades. Clear vinyl allows the warmth of the sun to fully penetrate the interior space while creating a barrier against the elements. Combined with outdoor heaters, these shades help make otherwise too chilly areas warm and cozy. Double polished clear vinyl has a glossy finish which prevents it from sticking to itself. It is stain and moisture resistant and can withstand both hot and cold temperatures. They're perfect for your patio, porch, deck, gazebo, pergola and lanai, anywhere cold breezes are a problem. Also great for outdoor cafes and restaurants. Protect your expensive plants from the cold and allow them to thrive in the full sun.
Resistance to the Elements: Our vinyl has passed the rigorous 200 hour UV and Weather Test for snow and rain. It can withstand temperatures down to 0 degrees without cracking.
Our outdoor shades are built to last. All shades are triple locked to rust proof rollers with spring loaded clips and then sealed with a weatherproof bonding to protect against the elements.
Brackets are marine grade with a rust proof powder coating. They come in your choice of black or white. Stainless upgrades are also available. For corrosive salt water exposure we recommend upgrading to our Dacromet brackets.
Rollease Exteriorrated clutches in matching black or white, have stainless steel internal springs to avoid rust. Super Clutches are automatically added to large shades to reduce the effort required to lift heavy shades.
Chains are UV resistant and won't break down. Chain lengths are 3/4's of the way down the shade.
Outdoor shades are constructed with a heavy duty aluminum weight bar at the bottom to prevent fraying. This bar comes in white, black, bronze or anodized and is secured to the welded bottom weight pocket. Extruded Aluminum Weight Bars at the bottom of the shade are available in anodized, bronze, black, white and attica beige.
Self tapping stainless steel D Rings are included with each shade to tie it down. Also available are optional custom 8" bungee cords. Secure bungee cords to the D Rings as shown in the photo to minimize how much the shades move in windy conditions. We can custom manufacturer bungee cords to the length you need.
An optional cable systemon each side of the shade helps stabilize the shade movement in windy conditions and can also serve as a tie down for motorized shades.
Optional Side Rails are offered in 6 colors.Side Railsare 2" wide and 3/4" deep. Maximum shade dimensions are 72" x 72". Side rails lock down the bottom bar of the shade only. There is a 1/4" gap between the side of the fabric and the beginning of the side rails so the fabric will not blow out. Side rails require a level, even mounting surface (not more than 1/4" shim is acceptable) and the purchase of the aluminum housing.
Optional 4" aluminum housing in 6 matching colors hide the roller and are recommended for motorized shades. Housing mounts either to the face of a beam or the underside of a beam.
L shaped fascias are available to hide the front of the roller. They can be side mounted.
A reverse roll to hide the roller is offered at no charge.
Vinyl comes 54" wide. Sonically welded horizontal seams will not come apart. Vinyl does expand and contract up to 2%.
Fabric Deductions: Shade fabric is 1 1/4" narrower than the tip to tip bracket dimensions ordered.
Motorization Options:
An outdoor shade can be motorized using using Somfy Atlus 110v Motors with Radio RemotesStandard with all motorized units is a pre-programmed remote control, single or multi channel. Motorized shades are ready to plug into a grounded outlet or they can be hardwired to a junction box. To hardwire to a junction box, install a shut off switch for each motor or disconnect each motor from the power source to program. Pricing for motorization is below. Remotes are pre-programmed at the factory.
All remotes are pre-programmed at the factory. Each channel is set to a corresponding shade, you merely need to set the limit stops of the shade.
